Electronics Build Guide MKS TinyBee
Set up the MKS TinyBee for a four-axis Wi-Fi CNC foam cutter, from installing FluidNC and bench testing the motors to homing, calibration and the first cut.
-
-
Electronics Build Guide BTT SKR Pico
This guide shows how I use a BTT SKR Pico board with grblHAL firmware to control my four-axis CNC foam cutter. It covers loading the firmware, connecting the motors, setting the driver current and checking the movement before making a cut.. Thanks to advancements in 3D printing, the electronics for a foam cutter are now…
-
Electronics Build Guide MKS Gen L V1 and V2
Introduction This guide will walk you through the steps to build the electronics for a CNC foam cutter. The MKS Gen L boards are highly reliable, and I’ve used them successfully in many projects. Thanks to advancements in 3D printing, the electronics for a foam cutter are now affordable and easy to source Advantages:- Disadvantages:-…
-
Electronics Build Guide Arduino Mega 2560 RAMPS 1.4
Introduction This guide will walk you through the steps to build the electronics for a CNC foam cutter using the Arduino Mega 2560 with a RAMPS 1.4 board. This is a great combination, and I’ve made many projects with them. Thanks to 3d printing, the electronics for a foam cutter are quite affordable and easy…
